Recent Mold Remediation Posts

3 Ways To Prevent Mold Damage in Your Home

5/24/2019 (Permalink)

Mold Remediation 3 Ways To Prevent Mold Damage in Your Home Water leak caused severe mold in the wall of this basement

3 Ways To Prevent Mold Damage in Your Home 

Protecting your Cordova, TN, home from fungi growth can be challenging, especially if you live in an area that experiences heavy annual rainfall or high humidity. Water damage is typically the main cause of mold development, such as hidden leaks or condensation. However, there are a few strategies you can use to prevent these conditions and make your home an unwelcome environment for most strains of fungi.

1. Check Your Home’s Pipes Annually

Pipe leaks and weak joints can lead to plumbing failure, which can cause a significant flood in your kitchen or bathroom. To prevent this, have your home’s pipes checked at least once a year to ensure they are in good working condition. Pipes hidden behind cabinetry can be especially prone to mold growth if they develop leaks, so ask your plumber to check these spaces to ensure mold is not growing on the wood or in dark corners.

2. Reduce Your Home’s Humidity

If your home experiences high humidity throughout much of the year, this can lead to mold growth in areas such as crawl spaces and attics. You can reduce humidity by using ceiling fans in vulnerable rooms and installing a dehumidifier in smaller spaces. On days where humidity is particularly high, avoid taking hot showers and run exhaust fans in your kitchen.

3. Call in a Mold Expert for an Inspection

If you suspect that certain areas of your home may be fostering fungi growth, consider calling a water damage and mold remediation service to inspect them. Experienced technicians can check your water lines, exterior pipes and air conditioning vents to ensure mold has not gained a foothold due to leaks or moisture buildup. It is wise to have a list of questions prepared for the technicians, especially if you have never worked with a mold prevention company before.

Water damage and other problems in your Cordova, TN, home can cause serious mold issues. Knowing how to prevent them can help you protect your home and keep mold from moving in.

Does Mold Grow Even in Drier Climates?

4/9/2019 (Permalink)

Mold Remediation Does Mold Grow Even in Drier Climates? Mold damage in a Memphis, TN basement

The thought of mold showing up in your office may cause worry and concern if you live in an area of high humidity. How should you feel if you live and work in places where it’s typically much drier? Should you expect black mold issues to creep into your building in Memphis, TN? Though fungal problems persist most usually in wet areas, no place is completely immune.

What Does Mold Like?

To begin with, it’s important to understand under what conditions mold does typically thrive. Even if your office is located in the most arid area in the world, there are still indoor environments where these problems could develop and where you’d need mold cleanup. These include:

  • Areas where there is poor ventilation
  • Areas where there has been flooding or other water damage
  • Areas where there are broken pipes such as under sinks
  • Showers

If your office has any of these areas of issues, you should inspect them and take action.

Can It Happen Anywhere?

It’s easy to see how fungal growth can creep up in your building, even if rain has been absent for weeks. For example, if you have an onsite fitness room with showers, and your fans are broken, there’s a chance you could spot some black mold. If you have old pipes in the plumbing system, they could start to crack and break. Also, if seals in the windows and on the roof are wearing out, when rain does fall, it could slowly find its way inside. Over time, this could develop into mold.

What Can You Do?

If you do spot mold, you need to get on the phone immediately with a mold remediation specialist. A group of professionals that have expertise in this area can clean up the substances and give you peace of mind.

Don’t assume because you live in a dry climate that black mold is impossible in your building. Implement proper safeguards today.

Mold Removal and Remediation Information for Homes and Businesses

2/19/2019 (Permalink)

Mold Remediation Mold Removal and Remediation Information for Homes and Businesses Mold can be found in humid places or it can be caused by Water Damage.

Mold and mildew are the most common household and business problems across the United States. Chances are that you've probably had mold damage in your house at one time or another. Mold damage isn't just unhealthy to be around, but it can be incredibly damaging to walls, insulation and the overall structure of the home. If left to fester, the area that has been impacted can become out of control, requiring more commercial mold damage services than before.

Mold Removal and Remediation Information 

How to Tell if Your Home Has a Mold Damage Problem

There are a variety of ways to tell if your home has mold damage. For one, you'll be able to spot the fungus and mildew with your own two eyes. Unfortunately, mold is not just at the surface level, so trying to clean mildew and fungus yourself often isn't enough to thoroughly get rid of it for good. This is why you'll find that no sooner do you clean the fungus, it is already growing back. Also, you'll have a smelly odor emanating throughout the home or office, which is a sign that you have a mold damage problem.

Why Professional Mold Removal is Preferred

Expert mitigation and remediation is essential because you're dealing with professionals who have years of experience and all of the right deodorization tools to get your home or office back to its former glory. It's also a safer way to handle the commercial mold damage issue, since you won't be the one handling it on your own. Mold in your home can be devastating, but the experts bring all of their own tools and skills to get the job done properly so that you don't have to figure out how to do it on your own.

How to Find the Right Mold Removal and Remediation Company

The best way to find a commercial mold damage company is to read reviews and look locally. If you hire a company too far away from your home or office, you're liable to pay a travel fee just so that they can come out to look at the damage. Keep in mind that the mitigation and remediation experts will first need to come out to the property to fully assess the damage before they can begin the work. Once the mitigation and remediation experts do this, they will give you a full quote for how much the project will cost. If you have insurance on your property, it may cover the costs of mold removal in your home.

What to Expect When Hiring the Mitigation Pros

When you hire a company to handle the mold in your home, you're taking the guesswork out of the job for yourself and your family. Mold removal can be pretty complicated, especially when you consider the deodorization techniques necessary to get rid of the fungus and mildew as well as that awful smelly odor. Commercial mold damage is also important to get rid of, since you don't want your customers and employees breathing in the fungal spores every time they come to do business.

Preventing Mold From Coming Back

The best way to prevent mold in your home and that pungent smelly odor is for you to be wary of how water is used and dispersed. If you tend to deal with mold in the home a lot, it could be a sign that you have leaking pipes or attic condensation that is allowing for water buildup in certain areas. In these cases, deodorization for the smelly odor just isn't enough, as you'll need to get rid of the cause of the mold entirely. The moment you notice there is a mold problem, be sure to hire the pros so that they can do the proper deodorization and restore your home back to the way it was before so that it's easier for you and your family to live comfortably.

3 Tips for Identifying Mold

1/22/2019 (Permalink)

Mold Remediation 3 Tips for Identifying Mold Mold in a Memphis, TN basement

How To Identify Mold?

If you’re looking at doing a mold inspection for your Memphis, TN, home then odds are you have something in your home you want to identify. A mold remediation specialist can take a look at any trouble areas and let you know if you have mold, and what your best course of action may be. Here are a few things they may look at during this process.

1. The Color

Mold can have a variety of colors depending on spore type. Molds that thrive outdoors may be orange or red in color. Indoor molds tend to vary between whites, grays, lighter green, and brown. Black mold tends to be darker greens, grays and black as indicated by the name. While certain species of molds tend to have specific colors, it can be difficult to tell which is which by color alone.

2. The Shape

During the mold inspection the shape and appearance of the potential mold growth may give some indication as to if and what type of mold is present. Mold generally has more depth to it than mildew, and may look fuzzy or gritty depending on type. Molds thriving in wet conditions can look slimy as well.

3. The Growth Pattern

In many cases the growth pattern can be an indication of if you’re looking at house mold or mildew. Mold spreads quickly and often grows into the material where it has settled. Mildew had a slower growth rate and can be wiped off the surface in question. If it’s determined that mold is present, it’s best to begin the removal process as quickly as possible to prevent further infestation.

Using these traits, the professional conducting your mold inspection can determine if you have a mold problem in your home, and what type it is. If you do have mold then you can begin the mold removal process, and take any steps you may need to prevent future problems.

3 Things To Know About Mold Removal

1/22/2019 (Permalink)

Mold Remediation 3 Things To Know About Mold Removal Take care of any mold related problems as soon as are discovered

Mold can cause a number of problems from structural damage to allergies. This is why it’s important to take care of any mold issues as soon as you become aware of the problem. When looking at mold removal for your Memphis, TN, home there are a few things you may want to know.

What Your Insurance Covers

When it comes to mold, the specifics of each individual policy may vary. However, the following are usually covered.

  •  Mold growth after emergency efforts in fire suppression, such as a sprinkler system or water from a fire hose
  •  Mold growth after an accidental pipe break
  •  Mold growth after storm damage
  •  Mold growth after flooding, if you have flood insurance in your policy

Insurance will not usually cover damages or remediation costs if the mold growth is due to neglect on the part of the homeowner. So, it is best to take care of any mold related problems as soon as they are discovered.

What A Remediation Professional May Do

In some cases, it may be best to hire a mold remediation service to thoroughly remove any spores from your home. During the mold removal process these professionals can look for any spreading, and take the steps necessary to help prevent future problems. They may also be able to repair damaged areas.

What the Costs Could Be

A mold inspection usually costs between $200 and $600. When it comes to mold remediation costs can vary depending on the mold type, and area of infestation. Small cases can cost as much as $500 dollars while large infestations resulting in structural damage could cost up to $30,000. Black mold removal may have extra costs depending on the methods used.

Having your mold removal process started as soon as you find the problem can not only save you money but may help when it comes time to file your insurance claim. It’s recommended to have a professional handle the removal process as they have the tools and knowledge to do the job thoroughly. If possible, it’s also recommended to take any steps you can to prevent future problems.

How To Get Rid Of Mold In Your Kitchen

12/28/2018 (Permalink)

You can often find mold damage such as fungus and mildew in your home or office kitchen. This is due to the fact that a lot of moisture can be found in this location. Some examples of kitchen moisture include running water from faucets and steam from tea kettles. The kitchen is also where the food is located, so this is yet another reason why you can often see mold in home and commercial mold damage in the residential or office kitchen.

If the humidity levels in your kitchen remain high, then mold may begin to grow. Some causes of kitchen humidity include liquids that don't get wiped up immediately, steam from a kettle and the steam that comes from cooking meals and cleaning your dishes.

Provide ventilation in your kitchen by opening doors and windows. Quickly clean up any liquid that you spill in the kitchen. Use exhaust fans to decrease your kitchen's humidity. If the mold damage in your kitchen gets to be too much for you to handle, then call on the services of a mold removal company that will provide remediation and deodorization services. The deodorization services will get rid of the smelly odor that often shows up when there is fungus and mildew in your kitchen. To rein in the mold problem, call the mold mitigation specialists as soon as you know that you have a problem.

Mold On Kitchen Dishes

If you don't wash your dishes every single day, you'll see fungus and mildew grow on them. When you stack dishes on top of each other, they don't get a chance to dry out. If they have enough time, mold will then take this opportunity to grow on your dishes. To best prevent mold from growing on your dishes, wash them immediately after use. If you do find mold on your bowls and plates, wash them as you normally would.

Determining the Extent of Your Mold Damage

9/11/2018 (Permalink)

Mold Remediation Determining the Extent of Your Mold Damage Mold and Mildew Tile damage

If you discover mold on your Bartlett, TN, property, you may want to know just how far the damage has spread so that you can get a better idea of remediation costs. There are a few different ways in which you can perform a mold assessment:

• Air Testing
• Surface Testing
• Bulk Testing

While you could purchase an at-home mold testing kit, only a professional assessment can give you a whole and accurate picture of the extent of any mold or mildew damage. For peace of mind and swift remediation, contact a mold remediation expert near you.

Air Testing

Air testing can tell you whether or not you have a mold problem even if you cannot find the mold growth. Air testing involves capturing air from inside your home and examining it for mold spores. Air testing can reveal the exact concentration of mold spores in your home.

Surface Testing

Surface testing involves swabbing various surfaces in your home with a cotton swab and examining the samples under a microscope. Unlike with air testing, however, surface testing cannot reveal the exact concentration of mold spores.

Bulk Testing

Bulk testing is often the best mold assessment technique, as it provides a complete picture of the extent of your mold problem. This method involves taking various items from around the home and lab testing them for black mold and mildew. Like with air testing, this method can give you an accurate idea of the concentration of mold spores present in your home.

Work With a Professional

If you suspect that you have a mold problem in your home, work with a professional who can thoroughly test your home and give you an accurate idea of the extent of the issue. A professional may perform one or all three of the aforementioned mold assessment methods. Contact a Bartlett, TN, mold remediation expert to have your home tested today.

For more on Bartlett click here

Protect Your Commercial Property From Mold Damage

7/25/2018 (Permalink)

Mold Remediation Protect Your Commercial Property From Mold Damage Protect your Commercial property from mold damage

Mold is known as the king of fungus because it can grow almost anywhere on earth. With over 100,000 different types of mold worldwide, it can thrive on organic surfaces of all types. The fungus is a frenzied eating machine created by nature to break down and recycle anything that was once alive. Yet surprisingly, mold sends out beautiful spores in dozens of colors including yellow, green, and black mold varieties. There is only one thing other than food that mold needs to complete a lifecycle, and that is water.

Playing Hide and Seek

If your commercial property in Bartlett, TN, has a moisture problem, you probably have mold. To eliminate the cause of the mold and stop the spread of spores, you need to stop the water source feeding the mold colonies. If your building experienced a flood of some type recently, invisible water damage could still be lurking. Water can easily seep under

• Cabinets
• Flooring
• Wallboards

The hidden water can easily provide spreading fungus with ample liquid for colony development. Additionally, wet insulation can feed mold colonies for months after a pipe leak occurs. In fact, weeks or months after the flooding, red, green or black mold can begin to make an appearance in areas you thought were dry.

Killing Water and Mold

To kill the mold, you need to remove the source of the water. Most water removal and mold remediation groups are trained in how to locate and identify hidden molds. Once the fungus is found, the cause of the water can be identified, and mold cleanup can begin. If floorings, cabinets, or lumber sections have been badly destroyed by the fungus colony, the building supplies may have to be replaced because the actual structure of an object can be ruined by mold.

Protecting Building and Property

Rather than attempting to remove yellow, purple, or black mold on your own, call in a team of specialists and have them identify the source of the water. Not only can you protect your property from further mold damage, but you may also be protecting the structure of your building.

For more on Bartlett click here

What Is Black Mold

5/13/2018 (Permalink)

Mold Remediation What Is Black Mold What is Black Mold?

With so many articles about toxic black mold in the news, you may be wondering exactly what it is and if you should be worried about it. You may even be in a panic because you’ve found mold growing in your home. The good news is that the mold in your home is probably not the type of mold that’s toxic. The bad news is that if you have any type of mold growth in your home, you may want to call a mold remediation specialist in Bartlett, TN, to begin cleanup. Whether it’s a species toxic to human health or not, mold can do extensive damage to your house.

The Low Down on Mold

Mold is a type of fungus, which means it’s a distant cousin to yeast and mushrooms. There are over 100,000 species of mold, and many of them are black. Of course, not all of these are likely to grow in your home. However, of the four most common types of mold to be found inside your house, half of them (species of Alternaria and Cladosporium) are likely to be black. The highly toxic species of black mold, Stachybotrys chartarum, isn’t rare, but it is less common than other household molds.

Why It Thrives

Stachybotrys chartarum, like all mold, thrives in places that are damp. Mold spores are found everywhere, so if you have areas in your home that are consistently moist, spores can land there and grow into a visible colony. This can be a damp corner of a poorly ventilated bathroom, the wall below a leaky window or a basement where groundwater is seeping through the concrete. To keep your home free of mold, follow the following tips to prevent excess moisture.

• Repair leaks
• Do regular maintenance on plumbing
• Keep indoor humidity below 50%
• Ventilate rooms

What To Do If You Have Mold

If you find mold growing in your home, don’t attempt to clean it up yourself. If it is Stachybotrys chartarum a mold removal service in Bartlett, TN, can ensure that the cleanup is done quickly and efficiently while keeping your family safe.

For more on Bartlett click here.

Mold Growth Hot Spots: How To Find Them

4/23/2018 (Permalink)

Mold Remediation Mold Growth Hot Spots: How To Find Them Ceiling Tile Mold Damage

No matter how you look at it, discovering that your commercial building has become host to a world of mold is no thrilling experience. Your building may even have mold growth in too many areas to count. While indoor mold is inevitable – at least to some degree – there are certain places that you can keep a close eye on in the future.

Carpet

You're likely too busy investigating the spores at eye level to notice that the carpet in your Bartlett, TN, building could also become mold's new turf. With its permeable materials, carpet has a way of soaking in moisture and dirt and keeping it there. Any past water damage in the building could raise your chances of having a mold-infested carpet. Depending on the extent of the damage, calling in a professional to get the job done might be a wise choice.

HVAC Systems

Your HVAC unit's drain pan, specifically, is another hot spot for mold growth. The pan naturally receives moisture from air passing through the system's coil, subsequently allowing that moisture to stick around. You can do the following to help prevent this mold-prone mess:

? Ensure proper installation of the pan
? Consider placing new access doors on the unit for better inspection
? Inspect the pan on a regular basis and clean when needed

By maintaining awareness of your unit's efficiency and any possible leaks, you can better rule out the pesky visitors.

Ceiling Tiles

Any rooms with acoustical ceiling tiles are prone to mold growth, even if the tiles don’t make up the entirety of your building's ceiling. It’s important to identify all sources of potential leaks. Any areas with high humidity are also especially vulnerable to fungal growth.

Part of keeping a thriving business includes regular maintenance checkups. Whether water damage or a humid setting may be causing problems, using these tips can help you get back to business sooner.

Click here for more on Bartlett.

How To Approach Mold Safely

3/27/2018 (Permalink)

Mold Remediation How To Approach Mold Safely Mold Containment in Bartlett

When you discover mold in your home, your first instinct is probably to get rid of it as soon as possible. You may want to grab the nearest cleaning supplies and start scrubbing. Cleaning mold without face masks or other proper protective equipment, however, can cause you to breathe in the mold spores. If you are going to get near the mold damage in your home, you need to put on at least three things:

" Face mask to protect lungs
" Gloves to protect hands
" Goggles to protect eyes

Cover the Face

When the mold remediation specialists in Bartlett, TN, arrive to remove the mold, one of the first things you will probably see them do is put on face masks. This keeps them from breathing in the spores that are already in the air when mold is present as well as those that will be released into the air as soon as they start the cleanup process. A well-fitting mask can keep mold spores out of their lungs while they work.

Cover the Hands

You should never touch mold with your bare hands. While most of the mold can be washed away with a vigorous washing with detergent, some spores may linger under your nails or on your arms. If you must remove items from the area where there is mold damage, always use gloves, preferably those that cover most of your arms as well.

Cover the Eyes

Another place you do not want mold spores to end up is in your eyes. If you are in the area where mold growth is being removed, it is a good idea to wear goggles. Try to find a pair that does not have ventilation holes, as spores may find a way to your eyes through those holes.

Most mold remediation must be done by professionals to ensure the problem is handled thoroughly. If you are around mold, however, face masks, gloves and goggles can help protect you from its spores.

Visit us at http://www.SERVPRObartlettcordovaeastmemphis.com for more information. 

Mold Insurance: What Is Covered

2/21/2018 (Permalink)

As a business owner in Memphis, TN, your insurance policies are important to maintaining your company and securing your future. Insurance coverage is there to protect against damages from several kinds of events. Floods, hurricanes and other natural disasters can lead to a widespread mold problem throughout your building. So, how do you know if you’re covered? How do you know what’s covered? Here are a few things that are generally covered under an insurance policy.


Direct Loss and Damage Costs


In some cases when it comes to fungus growth, the insurance claim depends heavily on how the mold grew. If the mold was due to a flood, you may need accompanying flood insurance to receive coverage. If you do have mold coverage, however, then you may find that your property is protected from direct losses or damage costs. This means that if the mold damages or ruins any of your business’s belongings, the cost will be covered.


Repair Costs


After a widespread mold problem, you are bound to have damages to the building. This is where you need a professional remediation service. With mold insurance, you should be covered for the repairs that need to be done. It’s also good to keep in mind that while most molds and funguses may be included in a policy, there are exemptions, especially with fungus growth.


Testing Costs


If you had a flood or other natural disaster that may cause you to worry about the presence of mold, then you should have your property professionally tested. The good news is that some coverage will take care of you when it comes to testing for fungus growth in your business.

Insurance is one of the single most important protections that a business can have. Given how mold is a common problem, it’s important to make sure that you are covered in case of damages.

For more information, visit http://www.SERVPRObartlettcordovaeastmememphs.com.

3 Tips to Prevent Mold Growth During Your Vacation

12/15/2017 (Permalink)

3 Tips to Prevent Mold Growth During Your Vacation

As you prepare to leave on vacation, the last thing you should have to worry about is encountering mold in your home upon your return. If water damage occurs in a residence and is left unattended, mold can spread throughout an entire residence in the span of 48 to 72 hours. Whether your trip is several days, weeks, or months long, here are three mold prevention tips you can take to help make sure all is well upon your return.

1. Turn Off the Water

Controlling moisture levels is the most effective and practical method for preventing mold. Pipes can be one of the major culprits behind major leaks, which can develop mold within 24 to 48 hours. Turning off the water makes burst or leaky pipes less likely and reduces the possibility that mold will grow.

2. Turn Down the Heat

Mold thrives in moist and warm environments. Keeping the interior of your home relatively cool while you are away is another method of mold prevention. If possible, running the HVAC system less can also reduce the amount of air circulating over any surface on which mold might be developing.

3. Leave Your Home Clean and Dry

A clean and dry environment does not lend itself to mold. Keeping interior humidity levels between 30% and 60% can stop mold from developing. A reliable dehumidifier can help you keep your home within this range.

4. Have Someone Periodically Check on Your Home

If your vacation will be extended, you might want to ask someone you trust to check in on your home at certain intervals just to be sure. This has safety benefits beyond just mold prevention.

If you know of a current mold issue that could turn into a problem, you should contact indoor environment specialists in Memphis, TN before leaving on vacation. Mold can grow and spread rapidly, and you may have a harder time managing the problem or making an insurance claim for unattended water damage if you leave. Mold prevention is the best approach to keep a new problem from developing while you are out of town. Visit http://www.SERVPRObartlettcordovaeastmemphis.com.com for more information on mold damage.

Mold Damage in your Home

9/28/2017 (Permalink)

Mold Damage in Your Home

As mentioned earlier, mold can infest your house when there’s dampness due to water leakage or floods. Luckily, homeowners can know when their houses are contaminated with mold. These two fungi are very similar but if you’re keen enough, you can differentiate the two. Usually, mildew is less detrimental than mold and appears like a gray patch growing on a damp surface. On the other hand, mold can have many colors depending on the type; usually green, black, or brown. These two fungi produce a pungent musty odor which is irritating to eyes and nasal cavity.

The Process of Professional Mold Mitigation

The process of mold removal and mitigation begins by mold inspection and testing. According to Environmental Protection Agency (EPA), homeowners should seek the services of mold damage inspection company if the mold is invisible or the infestation is too large for do-it-yourself methods. A mold inspector will come to your house and perform a visual examination of suspected areas to locate and determine the extent of the infestation. He will also try to detect smelly odor if there are any. If necessary, he will then collect two air samples (one from inside and another from outside) to test for air contamination and also to know the type of the mold. The samples are then taken to an approved laboratory where they are tested. Once the results are known, the inspector will share them with you and advise you on the way forward.

After identifying the type of the mold and the level of contamination, the mold removal and mitigation company will then commence the process of mold removal. They will give you a written quote and if you’re satisfied, the process should begin as soon as possible. On the day of remediation, they will come to your house and survey the whole building, inside and outside. They will repair water leakages that may cause smelly odor and isolate the contaminated area. They will close all windows and doors separating the contaminated rooms from other rooms and cover them with polyethylene sheeting. This is done to prevent the spread of spores, smelly odor and fungus to uncontaminated areas.

Soon after the containment, the team will suppress dust in the contaminated room by misting the whole place. This process is also called deodorization. Then, they will then remove all moldy porous materials and discard them in plastic bags which are then tied tightly. They decontaminated the outside surface of the bags and take them outside through the window to prevent any smelly odor. The next process involves cleaning and deodorization of all contaminated surfaces with chemicals approved by EPA. The entire area is scrubbed and dried to make sure that all the mold, mildew and moisture are removed completely. Afterward, they will use a HEPA vacuum to vacuum the entire place leaving no moisture or debris. The contaminated debris and dirt are discarded in plastic bags which they take them away.

After mold damage remediation and deodorization, the homeowner should contact a mold inspector again to perform surface testing just to confirm whether the deodorization and remediation were effective. Once this process is over, the house can now be declared mold-free.

Whilst mold and mildew can pose no threat, the EPA recommends that these fungi should be immediately removed by mildew mold damage remediation and removal company if they become a problem. The same process can also be applied to commercial mold damage. The only difference is that commercial mold damage may be more costly and takes a longer time to clear.

Why You Can't DIY Mold Removal

8/30/2017 (Permalink)


Why You Can't DIY Mold Removal

Mildew, fungus, and dry rot all concern home and business owners, but nothing concerns anyone as much as noticing any form of black mold. When people find black mold at home or work, they tend to wonder if it’s the kind they should worry about. The good news is not all black mold is the kind people see on the news and read about, but the bad news is it takes a professional restoration company, remediation, and mitigation to determine if black mold is harmless or not.

When people find mildew, mold growth, fungus, and/or dry rot, they don’t usually panic. It’s not a big deal, especially if the area in which the mold damage is growing is a small one. They immediately try to clean it up on their own and ignore the problem. After all, mildew and dry rot are pretty common in many areas, and no one worries much about it. The truth is all mildew, fungus, dry rot, and even a smelly odor with a hint of must to it is a concern. It’s time to learn what to do when people find mold in the home and commercial mold damage.

Identifying Mold

The first step is identifying mold growth and mold damage. It might not be as easy as people think. The obvious signs of mold damage are dry rot, mildew, and fungus. These each require relatively similar conditions to grow, and so does mold growth. This means people might not want to ignore dry rot assuming it’s not a big deal, they might not want to wipe up mildew or fungus and think that’s enough, and they might want to pay closer attention to that smelly odor.

The smelly odor is probably the biggest cause for concern. It’s a little musty. People use deodorization to get rid of it. That might include using candles, air freshener, or opening doors and windows to air out a home. This kind of deodorization works for everything else, so why not this? The problem is this kind of deodorization won’t work on this kind of smelly odor, because it’s probably mold growth behind the walls. When mold growth behind walls occurs, it typically means flood waters weren’t completely cleaned out of a home or office or there is a problem with the pipes somewhere.

Mold growth behind walls is a very common issue for home and business owners. In fact, many people find mold in the home and commercial mold damage after mold growth behind the walls begins to spread outside the walls causing more serious damage.

What to Do When There is Mold in the Home or Commercial Mold Damage

Any mold growth or mold damage found in a home or business must be taken seriously from the start. The best thing to do is call a professional restoration company to handle the mold removal aspect. They’ll come out and provide remediation and mitigation to help. They can identify black mold as harmless, they completely dry water damage, find the mold growth at the source, and continue with remediation and mitigation to help home and business owners get rid of mold growth once and for all.

What Not to Do When There is Mold in the Home or Commercial Mold Damage

There’s a lot to learn about mold damage. A restoration company should deal with mold removal. No home or business owner should attempt any form of DIY mold removal at any point. They need to leave mold removal to the pros along with the remediation and mitigation process. Attempting DIY mold removal only spreads mold spores and increase mold damage.

The best way people can help is to shut off the air to prevent the faster spread of spores, to start drying any water damage, and to avoid touching any mold. Mold removal is best handled by a restoration company with the proper equipment for deodorization, clean-up, and removal. Remediation and mitigation are not optional when mold is a problem.
Visit http://www.SERVPRObartlettcordovaeastmemphis.com for more information on mold.

Effective Methods of Mold Remediation in Home and Business

7/25/2017 (Permalink)


Effective Methods of Mold Remediation in Home and Business

Mold damage is a hot topic in many states for some time now, the concerns made by home and business owner are sincere, and the process of mold removal is encouraged as a mitigation process to reduce the molds in homes and business infested with the black molds. It’s easy to identify the fungus because they produce a characteristic dry rot and smelly odor. For any mold growth, as remediation process, mold damage is achieved through deodorization and commercial mold damage done by a restoration company.

What are molds? What are factors that encourage the growth of mildew?

Mold damage mainly is due to a fungus which contains the ability to reproduce both in interior and external environment including the molds behind walls and other surfaces. The breeding places of the molds include areas that are damp hence encouraging mold growth. Mildews too are fungi, and like mold behind walls, they both grow on many surfaces including on foodstuffs, shower beds and in sheets of papers. They are both classified as molds in homes. The restoration companies provide mitigation processes through the process of commercial mold damage and deodorization. The objectives of the companies are reducing the effects of smelly odor and dry rot caused by the black mold.

Among the factors that encourage the mold growth, both mildew and black mold include high concentration and presence of damp areas within homes and business. Hence the remediation aims at reducing these areas.

The remediation process of handling mold growth
Restoration companies suggest many approaches to fighting black mold growth behind walls and mildew. The companies also do develop techniques of handling dry rot and smelly odor. The process proposed is safe and affordable for the whole ordeal of fighting mold growth behind walls in homes and business.

Mold eradication is done specifically by the restoration company, and they do it based on the cleanup protocol which they adhere to strictly. The process of mitigation through cleanup is done carefully to avoid the recurrence of the black molds and mildew. Enrolling in this process of reducing mold in the home is sometimes expensive, but it offers a positive long-term solution in effectively handling mold removal.

Before deodorization, homeowners are encouraged to ensure proper ventilation since it is a crucial step in the process of mitigation against the spread of molds. Circulation of fresh air within the house provide sufficient oxygen levels, important in the elimination of smelly odor and setting an unfavorable condition molds to cause dry rot. Hence stops any resurgence of the molds, ventilation is a factor to consider in avoiding the spread of the spores to other rooms.

The best remediation process for doing mold removal without necessarily looking for help from a certified restoration company for commercial mold damage includes the removal the fungus by home protection through routine maintenance. All homeowners who suspect any mold growth behind wall, rooftop or on the shower should seek for inspections on the on damage on water and sewage system since the two have a tendency of reproducing of wet areas.

As a technique encouraged by any restoration company in dealing with molds in homes before embarking on commercial mold damage, then the house should be kept humidity free. For instance to foster mold removal maintaining the humidity at 50% is encouraged. So access to a conditioner or dehumidifier is a mitigation approach in ensuring low humidity is maintained. Also to reduce mold damage and reduce its spread, mainly the mold growth behind the walls then disinfectant can be used in the deodorization process. The application of the disinfectant depends primarily on whether the walls are porous or non-porous. For the non-porous wetting, a piece of and cleaning up is encouraged. But for the porous it is a bit tough to clean them by use of a wet cloth; hence one to avoid further spread of the fungus is required to cut the piece that is infected.
Visit http://www.SERVPRObartlettcordovaeastmemphis.com for more information on mold.

Professional Mold Remediation

5/15/2017 (Permalink)

Professional Mold Remediation

Mold in home and mildew have been a major challenge to many homeowners especially those living in gulf coast cities like Houston, Texas, just as how commercial mold damage is bad for business owners. They are dangerous fungus that have potential to destroy property. In fact, some homeowners have fled or sold their homes due to these mold in home which can be quite troublesome. Mold and mildew thrive in damp areas where there’s water leakage especially near damaged pipes or water heater. These fungus can also grow in your home after water damage by floods.

Mold in the home tends to grow in the basement, under carpets, inside the walls, near HVAC systems, on the floor, and on bathroom walls. They can also infest your car seats, couches, and other wooden structures in your home. Fortunately, today mold in home are not as such hectic as before thanks to many professional mold removal companies which have sprouted in almost every state. These companies offer effective mold removal and mitigation services and are a savior to many homeowners who have fallen victims to these fungus. Business owners who suffer heavy commercial mold damage could also benefit from their service.

Visit http://www.SERVPRObartlettcordovaeastmemphis.com for more information on mold damage.